Milnor MCR12E5 - Page 2

Please Read
About the Manual Identifying Information on the Cover—The front cover displays
pertinent identifying information for this manual. Most important, are the published manual
number (part number) /ECN (date code). Generally, when a replacement manual is furnished, it
will have the same published manual number, but the latest available ECN. This provides the user
with the latest information applicable to his machine. Similarly all documents comprising the
manual will be the latest available as of the date the manual was printed, even though older ECN
dates for those documents may be listed in the table of contents.
When communicating with the Milnor factory regarding this manual, please also provide the
other identifying information shown on the cover, including the publishing system, access date,
and whether the document ECN’s are the latest available or exact.
Best Available Information—This manual contains the most accurate and complete
information available when Milnor shipped your machine/software. Products are occasionally
released with the best available documentation, even though the device identification (model
numbers, etc.) on the documentation does not explicitly include the delivered model. In such
cases, use the documentation provided.
Although unlikely, incorrect manuals may have been shipped with your machine. If you believe
you received the wrong manuals, or if you need specific information about any aspect of your
machine not addressed in the provided documentation, contact the Milnor Customer Service
group.
References to Yellow Troubleshooting Pages—This manual may contain references
to “yellow pages.” Although the pages containing trouble-shooting procedures are no longer
printed on yellow paper, troubleshooting instructions, if any, will be contained in the easily
located “Troubleshooting” section. See the table of contents.
Trademarks of Pellerin Milnor Corporation—The following terms, some of which
may be used in this publication, are trademarks of Pellerin Milnor Corporation:
CBW
®
E-P OneTouch
®
Gear Guardian
®
Mildata
®
Milnor
®
Staph-Guard
®
E-P Express
®
E-P Plus
®
Mentor
®
Milnet
®
MultiTrac™ Visionex™
Trademarks of Other Companies—The following terms, some of which may be used in
this publication, are trademarks of their respective companies:
Acronis
®
Microsoft Windows 2000
®
Yaskawa
®
Siemens
®
Atlas 2000
®
Microsoft Office XP
®
Microsoft Access
®
Seagate Crystal Reports
®
IBM
®
Microsoft Windows NT
®
Microsoft Windows XP
®
Comments and Suggestions
Help us to improve this manual by sending your comments to:
Pellerin Milnor Corporation
Attn: Technical Publications
P. O. Box 400
Kenner, LA 70063-0400
Fax: (504) 469-1849