Milnor MWR18E4 Series User Manual

Published Manual Number: MTCEPB01
• Specified Date: 20060823
• As-of Date: 20060823
• Access Date: 20060823
• Custom: n/a
• Applicability: CEP
• Language Code: ENG01, Purpose: publication, Format: 1colA
General—
Operating and
Troubleshooting
Washer-extractors with
the E-P OneTouch
®
Controller
PELLERIN MILNOR CORPORATION POST OFFICE BOX 400, KENNER, LOUISIANA 70063 - 0400, U.S.A.

Milnor MWR18E4 Series Specifications

General

Model	MWR18E4 Series
Category	Washer
Water Consumption	Varies by program
Water Levels	Multiple levels
Programs	Multiple programmable options
Construction	Stainless steel
Power Supply	Varies by model (typically 208-230V or 460V)
Dimensions	Varies by model
Type	Industrial Washer-Extractor

Summary

Preface

i. About This Manual

Provides commissioning, operating, and troubleshooting instructions for washer-extractors.

i.3. Trademarks

Lists trademarks of Pellerin Milnor Corporation and other companies.

ii. Contacting Milnor®

Provides contact information for ordering parts, customer service, and technical support.

ii. 3. Warranty Information

Explains how to obtain warranty information and contact the warranty group.

Chapter 1. Commissioning

1.1. Important Owner/User Information

Ensures all personnel read the safety manual before machine access and customizes the controller.

1.2. About the Forces Transmitted by Washer-extractors

Discusses requirements for rigid and flexibly-mounted machine foundations and floor strength.

1.3. Important Instructions for Pumped Chemical Inlets

Warns about chemical corrosion and provides guidance on routing chemical tubing.

1.4. Electrical Connections for Liquid Chemical Systems

Explains pump signal connections, timer stop connections, and electrical safety.

1.5. Formulas in Milnor® Washer-extractors with E-P OneTouch® Controls

Describes formulas for hotels, hospitality, and healthcare applications.

Chapter 2. Configuring

2.1. Configuring E-P OneTouch® Washer-extractor Models

Explains how to set DIP switch positions to ON or OFF and configure the controller.

2.1.2. Configuration Decisions for Machines with Controller 08BT168AT

Details DIP switch settings for formula sets, final rinse, and operation modes.

2.1.3. Configuration Decisions for Machines with Controller 08BT168BT

Details DIP switch settings for hospitality, formula sets, bath temperature, and operation modes.

Chapter 3. Operating

3.1. Determining Load Size

Provides guidelines for determining the correct load size for washer-extractors.

3.2. Controls on E-P OneTouch® Model Washer-extractors

Details control functions during normal operation and testing modes.

3.3. E-P OneTouch® Operation

Provides step-by-step instructions for loading, starting, and unloading the machine.

Chapter 4. Testing and Troubleshooting

4.1. Troubleshooting Errors

Covers troubleshooting common errors like vibration switch, door open, and inverter faults.

4.2. Testing MWR_ Washer-extractors

Explains testing procedures with and without the display kit.

4.3. Event Timing for 08BT168AT Controller Boards

Lists events and timing for Hotel/Hospitality and Healthcare formulas.

4.4. Event Timing for 08BT168BT Controller Boards

Lists events and timing for Hotel/Hospitality and Healthcare formulas.