Milwaukee 0721-20 User Manual

Cat. No.
No de cat.
0721-20
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
1/2" RIGHT ANGLE DRILL
13 mm (1/2") POIGNÉE COUDEE ANGLE DROIT
TALADROS EN ANGULOS RECTOS, DE 13 mm (1/2") CON EMPUNADURA
EN "D" DE
TO REDUCE THE RISK OF INJURY, USER MUST READ OPERATOR'S MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE LE
MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER EL MANUAL
DEL OPERADOR.

Milwaukee 0721-20 Specifications

General

Voltage	18V
Speed Settings	2
No Load Speed	0-450 / 0-1, 800 RPM
Chuck Size	1/2 inch
Battery Type	Li-ion
Type	Cordless Drill

Summary

General Safety Rules for All Battery Operated Tools

Work Area Safety

Guidelines for maintaining a safe and clear work environment, including preventing hazards from dust and keeping bystanders away.

Electrical Safety

Rules for preventing electric shock, including proper plug use, avoiding contact with grounded surfaces, and protecting tools from water.

Personal Safety

Recommendations for user safety, such as staying alert, using protective equipment, and avoiding accidental starting.

Power Tool Use and Care

Battery Tool Use and Care

Specific Safety Rules

Tool Assembly

Ring Clamp, Extension, and Side Handle for Right Angle Drive (RAD)

Attaching Right Angle Drive to a Drill

Step-by-step guide on how to connect the right angle drive unit to the main drill body.

Removing the Chuck from the RAD

Removing the Chuck from the Drill

Operation

Forward/Reverse/Trigger Lock Switch

Explanation of the switch used to control the direction of rotation and lock the trigger.

Installing Bits into Keyed Chuck

Starting, Stopping and Controlling Speed

Applications

Drilling

Drilling in Wood, Composition Materials and Plastic

Maintenance