Need help?Do you have a question about the Milwaukee 2656-20 and is the answer not in the manual?
Keep work area clean, well lit, and free from flammable materials and bystanders.
Avoid contact with grounded surfaces and use outdoor-suitable extension cords.
Stay alert, use PPE, and prevent unintentional starting by ensuring the switch is off.
Recharge only with the specified charger and use only designated battery packs.
Lists Cat. No., Volts DC, RPM, and IPM for various models.
Identifies key parts like drive chuck, LED, control switch, trigger, and speed control.
Explains symbols for voltage, current, speed, and certifications.
Guides for inserting/removing batteries and attaching/removing accessories.
Instructions for selecting speed, starting, stopping, and controlling tool operation.
Guidance on achieving proper torque and avoiding damage to fasteners.
Covers tool maintenance, cleaning, and repair guidance.
Warning to use only recommended accessories and remove battery before changes.
Keep work area clean, well lit, and free from flammable materials and bystanders.
Avoid contact with grounded surfaces and use outdoor-suitable extension cords.
Stay alert, use PPE, and prevent unintentional starting by ensuring the switch is off.
Recharge only with the specified charger and use only designated battery packs.
Lists Cat. No., Volts DC, RPM, and IPM for various models.
Identifies key parts like drive chuck, LED, control switch, trigger, and speed control.
Explains symbols for voltage, current, speed, and certifications.
Guides for inserting/removing batteries and attaching/removing accessories.
Instructions for selecting speed, starting, stopping, and controlling tool operation.
Guidance on achieving proper torque and avoiding damage to fasteners.
Covers tool maintenance, cleaning, and repair guidance.
Warning to use only recommended accessories and remove battery before changes.
General| Voltage | 18V |
|---|---|
| Weight | 2.1 lbs |
| Battery System | M18 |
| Chuck Type | Quick-Change |
| Battery Type | Lithium-Ion |
| Drive Size | 1/4 inch hex |
| Max Torque | 1500 in-lbs |
| Speed | 0-2750 RPM |
| Impacts Per Minute | 0-3450 IPM |
| Length | 5.5 inches |
To Next Page