Need help?Do you have a question about the Milwaukee M18 2659-20 and is the answer not in the manual?
Keep work area clean, well lit, and free of flammable substances. Keep others away.
Ensure proper plugs, avoid wet conditions, and use RCDs for damp locations. Never abuse the cord.
Stay alert, wear PPE, prevent unintentional starts, dress properly, and maintain balance.
Use correct tool, don't force, maintain switches, check for damage, keep tools sharp.
Recharge with correct charger, use designated packs, keep away from metal objects, avoid liquid contact.
Have tool serviced by qualified personnel using identical replacement parts to maintain safety.
Use insulated grips, wear ear protection when impact drilling, use specific accessories, maintain labels.
Push release buttons to remove; slide pack into body and ensure it latches to insert.
Use specific sockets, align hole with detent pin, push socket onto anvil to secure.
Use specific sockets, align accessory with anvil, push firmly over retaining ring to attach.
Press shank into chuck to attach bits; pull ring and remove accessory to detach.
Stop the tool completely before changing speeds by pushing the selector to "1" for Low or "2" for High.
Pull trigger to start, vary speed by trigger pressure, release trigger to stop. LED illuminates when trigger is pulled.
Longer impacting tightens more; avoid over-impacting, especially small fasteners. Practice for desired torque.
Adopt a regular maintenance program. Return for lubrication, inspection, cleaning, and testing.
Clean dust/debris from vents. Use mild soap and damp cloth; avoid solvents harmful to plastics.
For repairs, return the tool, battery pack, and charger to the nearest service center.
Keep work area clean, well lit, and free of flammable substances. Keep others away.
Ensure proper plugs, avoid wet conditions, and use RCDs for damp locations. Never abuse the cord.
Stay alert, wear PPE, prevent unintentional starts, dress properly, and maintain balance.
Use correct tool, don't force, maintain switches, check for damage, keep tools sharp.
Recharge with correct charger, use designated packs, keep away from metal objects, avoid liquid contact.
Have tool serviced by qualified personnel using identical replacement parts to maintain safety.
Use insulated grips, wear ear protection when impact drilling, use specific accessories, maintain labels.
Push release buttons to remove; slide pack into body and ensure it latches to insert.
Use specific sockets, align hole with detent pin, push socket onto anvil to secure.
Use specific sockets, align accessory with anvil, push firmly over retaining ring to attach.
Press shank into chuck to attach bits; pull ring and remove accessory to detach.
Stop the tool completely before changing speeds by pushing the selector to "1" for Low or "2" for High.
Pull trigger to start, vary speed by trigger pressure, release trigger to stop. LED illuminates when trigger is pulled.
Longer impacting tightens more; avoid over-impacting, especially small fasteners. Practice for desired torque.
Adopt a regular maintenance program. Return for lubrication, inspection, cleaning, and testing.
Clean dust/debris from vents. Use mild soap and damp cloth; avoid solvents harmful to plastics.
For repairs, return the tool, battery pack, and charger to the nearest service center.
General| Voltage | 18V |
|---|---|
| Tool Type | Impact Driver |
| Battery System | M18 |
| Battery Type | Lithium-ion |
| Length | 5.5 in |
| Anvil Type | 1/4-inch hex |
| Chuck Type | Hex |
To Next Page