EasyManua.ls Logo

Milwaukee M18 FUEL 2953-20 - User Manual

Milwaukee M18 FUEL 2953-20
5 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Cat. No. / No de cat.
2953-20
M18 FUEL™ 1/4" HEX IMPACT DRIVER
TOURNEVIS À PERCUSSION HEXAGONAL DE 6 mm (1/4")
M18 FUEL™
DESTORNILLADOR DE IMPACTO HEXAGONAL M18 FUEL™
DE 6 mm (1/4")
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
Question and Answer IconNeed help?

Do you have a question about the Milwaukee M18 FUEL 2953-20 and is the answer not in the manual?

Summary

General Power Tool Safety Warnings

Work Area Safety

Keep work area clean, well lit, and free of flammable materials.

Electrical Safety

Follow precautions to avoid electric shock, use proper plugs and cords.

Personal Safety

Stay alert, use common sense, wear PPE, and avoid operating under influence.

Power Tool Use and Care

Assembly

Removing;Inserting the Battery

Instructions for removing and inserting the battery pack safely.

Attaching and Removing Accessories

How to attach and remove drill and driver bits from the chuck.

Operation

Using the Control Switch

How to operate the forward, reverse, and lock control switch.

Selecting Speed

How to change the speed settings using the selector button.

Milwaukee M18 FUEL 2953-20 Specifications

General IconGeneral
Voltage18V
Max Torque2, 000 in-lbs
Weight3.64 lbs (with battery)
Motor TypeBrushless
LED LightYes
Drive Control4-Mode DRIVE CONTROL
No Load Speed0-3, 600 RPM
Impacts Per Minute0-4, 300 IPM
Battery TypeM18 REDLITHIUM
Drive Size1/4 inch hex
Max RPM3600 RPM
Max IPM4, 300 IPM
RPM3600 RPM
IPM0-4, 300 IPM

Related product manuals