To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee M18 FUEL 2853-20 and is the answer not in the manual?
Introduction to the operator's manual for the Milwaukee M18 FUEL 1/4" Hex Impact Driver.
Comprehensive safety guidelines for workspace, electrical hazards, and operator well-being.
Best practices for safe power tool and battery handling, use, and care.
Technical details, model info, and operational symbols for the impact driver.
Identification and purpose of key components and features of the impact driver.
Special safety advice for handling the impact driver, including accessory use and noise protection.
Instructions for attaching accessories and inserting/removing the battery pack.
Guidance on starting, stopping, speed control, and using the impact driver.
Tips for effective use of the impact driver, including torque control and fastener care.
Procedures for keeping the tool, battery, and charger in good working order and clean.
Information on service, accessories, and US/Canada warranty details.
Steps to validate the warranty and conditions for coverage.
Situations and conditions under which the warranty is not valid.
General| Voltage | 18V |
|---|---|
| Drive Control | 4-Mode |
| Max Torque | 2, 000 in-lbs |
| Motor Type | Brushless |
| Chuck Type | 1/4" Hex |
| Impacts Per Minute | 0-4, 300 IPM |
| Battery Compatibility | M18 |
| RPM | 0-3600 RPM |
| IPM | 0-4, 300 IPM |
