Milwaukee 2738-20 - User Manual

Cat. No. / No de cat.
2738-20
M18™ 7" VARIABLE SPEED POLISHER
POLISSEUSE À VITESSE VARIABLE M18™ DE 180 mm (7")
PULIDORA M18™ DE 180 mm (7") DE VELOCIDAD VARIABLE
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

Summary

General Power Tool Safety Warnings

Work Area Safety

Maintain a clean, well-lit work area and keep bystanders away to prevent accidents.

Electrical Safety

Ensure proper plugs, avoid wet conditions, and protect from electrical hazards.

Personal Safety

Stay alert, wear PPE, prevent unintentional starting, and maintain balance.

Power Tool Use and Care

Kickback and Related Warnings

Understand kickback causes and take precautions to maintain control.

Safety Warnings Specific for Polishing Operations

Assembly

Removing;Inserting the Battery

Installing Side Handle

Installing the Bail Handle

Installing Polishing Pads; Bonnets

Operation

Starting, Stopping and Controlling Speed

How to start, stop, and adjust the polisher's speed.

Polishing

Preventing Burning Through Paint

Preventing Snagging

Maintenance

Milwaukee 2738-20 Specifications

General

Brand	Milwaukee
Model	2738-20
Category	Sander
Language	English