EasyManua.ls Logo

Milwaukee 49-40-6110 User Manual

Milwaukee 49-40-6110
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Cat. No. / No de cat.
49-40-6110
CUTTING DUST SHROUD
DÉFLECTEUR DE POUSSIÈRE DE COUPE
CUBIERTA PARA CORTE PROTECTORA DEL POLVO
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
Question and Answer IconNeed help?

Do you have a question about the Milwaukee 49-40-6110 and is the answer not in the manual?

Milwaukee 49-40-6110 Specifications

General IconGeneral
Model Number49-40-6110
CategoryVacuum Cleaner
TypeWet/Dry Vacuum
Fits BrandsMilwaukee
Peak Horsepower6.5 HP
Voltage120V
Accessory TypeFilter
Hose Length7 ft
Included AccessoriesFilter
Power SourceCorded Electric

Summary

General Safety Warnings

Work Area Safety

Guidelines for maintaining a safe and clear work environment, avoiding hazards.

Electrical Safety

Precautions for safe use of electrical tools, avoiding wet conditions.

Personal Safety

Recommendations for user alertness, protective gear, and body positioning.

Use and Care

Instructions on how to properly use and maintain the product for optimal performance.

Specific Safety Rules

Hearing Protection

Advises wearing ear protection due to potential noise exposure.

Shock Hazard Awareness

Caution regarding live wires and insulated gripping surfaces.

Wheel Compatibility

Specifies approved diamond abrasive wheels and disallowed types.

Product Specifications

Vacuum Port Dimensions

Details the outer and inner diameters of the vacuum port.

Adaptor Dimensions

Provides the outer and inner diameters of the adaptor.

Cutting Wheel Capacity

Specifies the size of cutting wheels compatible with the shroud.

Grinder Compatibility Note

Information regarding specific collar design for grinder compatibility.

Assembly Instructions

Attaching the Shroud

Step-by-step guide for mounting the dust shroud onto the grinder.

Operation Instructions

Dust Extractor Setup

Instructions for setting the dust extractor to automatic-cleaning mode.

Cutting Procedure

Guidance on aligning the shroud and performing cuts on specified surfaces.

Related product manuals