Need help?Do you have a question about the Milwaukee 5620 and is the answer not in the manual?
General| Brand | Milwaukee |
|---|---|
| Model | 5620 |
| Category | Power Tool |
| Language | English |
Chart detailing appropriate wire gauge for extension cords based on length and amperage rating.
Bits recommended for regular woods without abrasives.
Bits recommended for composites and solid lumber, offering better wear resistance.
Bits with one-piece geometry, ideal for trimming edges and slotting.
Guidance on maintaining carbide tip tools, including honing and storage.
Advice on choosing the correct bit for specific cutting tasks and materials.
Step-by-step instructions for assembling the collet and collet nut.
Procedure for correctly inserting and securing a router bit into the collet and chuck.
Specifications for various template guides and hinge butt guides for 1.00 H.P. and 1.50 H.P. routers.
Specifications for core box bits, including dimensions for high speed steel and carbide tipped options.
Specifications for dovetail bits, detailing dimensions for high speed steel cutters.
Specifications for rabbeting bits, including dimensions for high speed steel and carbide tipped options.
Specifications for V-grooving bits, ideal for lettering and sign work, in high speed steel.
Specifications for a stagger tooth straight bit offering dual flute balance.
Specifications for hinge mortising bits, designed for fast cutting and starting from the work edge.
Specifications for slotting cutters used for plywood and core boards.
Specifications for combination panel bits with drill points, for trimming veneer and template routing.
Specifications for down spiral pilot panel bits for cutting synthetic materials.
Specifications for general purpose straight bits, providing smooth finish cuts.
Bit combining straight and 22° bevel trim cuts for versatility.
Bit for finish trim on plastic laminate doors, tables, and furniture.
Bit for producing square, flush edges on plastic laminates.
Bits for veining designs on panels, cabinet doors, and furniture.
Trimmers designed for chip-free cuts on laminates, eliminating surface flake out.
Bits for decorative edging and making concealed joints.
Bits for decorative edging and drop leaf table joints.
Bits for decorative edging and drop leaf table joints.
Bits for decorative furniture where pilot guides router along the edge.
Bits for decorative furniture where pilot guides router along the edge.
Bits for decorative cuts using a clamped straight edge or template as a guide.
To Next Page