To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee M12 2426-20 and is the answer not in the manual?
General| Voltage | 12V |
|---|---|
| Battery Type | Lithium-Ion |
| Speed Settings | 2 |
| Cordless | Yes |
| Tool Category | Drill/Driver |
Keep work area clean, well lit, and free from flammable liquids, gases, or dust. Keep children and bystanders away.
Ensure proper electrical connections, avoid contact with grounded surfaces, and use GFCI in damp locations.
Stay alert, use common sense, wear PPE, and prevent unintentional starting.
Use the correct tool for the job, do not force it, and maintain it properly.
Use only specified chargers and battery packs. Avoid extreme temperatures and damaged batteries.
Hold tool by insulated surfaces, secure workpiece, check for hidden utilities, keep hands clear.
Use sharp blades, know your workpiece, and remove nail/screw heads before scraping.
Use respiratory protection in dusty areas, exercise caution, and seek professional help if unsure.
Explanation of symbols used in the manual, such as Volts DC and OPM.
Identifies key components like accessory bolt, flanges, handle, and on/off switch.
Lists Cat. No., Volts, Battery Type, Charger Type, OPM, Hex Wrench, and operating temperature.
Instructions for removing and inserting the battery pack, including safety warnings.
Step-by-step guide for changing accessories using the hex wrench and adapter.
Warnings about keeping hands away from moving parts and using proper PPE.
Describes how to perform sawing/cutting tasks with the tool.
Describes how to perform scraping tasks with the tool.
Describes how to perform sanding tasks with the tool, including grit selection.
Instructions on how to start, stop, and set the speed of the tool.
Perform regular maintenance, inspect for issues, and return for professional repair.
Clean tool with mild soap and damp cloth; avoid solvents and immersing in liquid.
Return tool for repair, use only recommended accessories, and find listings online.
Provides contact details for service and technical support in the USA and Canada.
Details warranty period, what is covered, and common exclusions like misuse or normal wear.
Disclaims implied warranties and limits liability for incidental or consequential damages.
Maintenir l'aire de travail propre et bien éclairée. Ne pas utiliser dans des atmosphères explosives.
Éviter le contact avec des surfaces mises à la terre, l'eau ou l'humidité.
Rester attentif, prêter attention au travail et faire preuve de bon sens lors de l'utilisation.
