To Next PageTo Next PageWhat to do if the red LED is on on my Milwaukee M12 2473-20 Power Tool?
If the red LED is illuminated, it indicates a device fault. Try the operation again. If the red LED remains on, return the tool, charger, and battery pack to a Milwaukee service facility for repairs.
Why is the green LED flashing on my Milwaukee M12 2473-20?
The green LED flashes because the battery doesn't have enough charge to complete the operation. To solve this, charge the battery.
What does it mean if the red LED is flashing on my Milwaukee M12 2473-20 Power Tool?
A flashing red LED indicates that the device is not within the correct operating temperature range. The operating temperature range is -10°C to 50°C. Bring the device into this temperature range.
What to do if green and red LED flashing alternately on Milwaukee Power Tool?
If the green and red LEDs are flashing alternately, it means the device needs servicing. Return the tool, charger, and battery pack to a Milwaukee service facility for maintenance.
What to do if my Milwaukee M12 2473-20 doesn't start with a charged battery?
If your Milwaukee Power Tool doesn't start or operate at full power even with a fully charged battery pack, clean the contacts on the battery pack. If, after cleaning, the tool still isn't working properly, return the tool, charger, and battery pack to a Milwaukee service facility for repairs.
Why is the red LED on my Milwaukee M12 2473-20 Power Tool constantly on?
If the red LED on your Milwaukee Power Tool is constantly on, it indicates a device fault. Try the operation again. If the red LED remains lit, return the tool, charger, and battery pack to a MILWAUKEE service facility for repairs.
What to do if the red LED is flashing on my Milwaukee Power Tool?
If the red LED is flashing on your Milwaukee Power Tool, it means the device is not within the correct operating temperature range. To fix this, bring the device into the operating temperature range, which is -10°C to 50°C.
What does it mean when the green and red LEDs are flashing alternately on my Milwaukee M12 2473-20?
If the green and red LEDs are flashing alternately on your Milwaukee Power Tool, it indicates that the device needs service. Return the tool, charger, and battery pack to a MILWAUKEE service facility for maintenance.
General| Type | Impact Wrench |
|---|---|
| Voltage | 12V |
| Battery Platform | M12 |
| Battery Type | Lithium-Ion |
| LED Light | Yes |
| Tool Warranty | 5 Years |
Guidelines for maintaining a safe and well-lit work environment to prevent accidents.
Precautions to prevent electric shock from power tool usage.
Essential safety measures for the operator, including protective equipment and alertness.
Key guidelines for using power tools safely and effectively.
Rules for charging, using, and storing battery packs to prevent fire and injury.
Guidelines for servicing power tools and battery packs by qualified personnel.
Mandatory safety precautions when operating the press tool.
Explanation of symbols used in the manual and on the tool.
Technical details including model number, voltage, and capacity.
Identification of the tool's main components and their functions.
Instructions for installing and removing the battery pack and crimping head.
How to operate the tool, check battery charge, and perform a press cycle.
Diagnosing issues based on LED status and suggested solutions.
Procedures for maintaining, cleaning, and inspecting the tool for optimal performance.
Information on repair services in the US and Canada, and recommended accessories.
Overview of the product's limited warranty terms and conditions.
