Milwaukee M12 2475-20 User Manual

Cat. No. / No de cat.
2475-20
M12™ COMPACT INFLATOR
GONFLEUR COMPACT M12™
INFLADOR COMPACTO M12™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

Milwaukee M12 2475-20 Specifications

General

Type	Impact Wrench
Voltage	12V
Battery Compatibility	M12
Tool Category	Power Tool
Power Source	Battery
Battery Type	Lithium-Ion
Chuck Size	1/4 inch hex

Summary

General Power Tool Safety Warnings

Work Area Safety

Keep work area clean and well lit. Avoid explosive atmospheres. Keep children away.

Electrical Safety

Match plugs to outlets. Avoid earthed surfaces. Do not expose to rain/wet. Do not abuse cord.

Personal Safety

Stay alert. Use protective equipment. Prevent unintentional starting. Remove keys/wrenches.

Power Tool Use and Care

Do not force tool. Use correct tool. Repair damaged tools. Keep cutting tools sharp. Keep handles dry.

Battery Tool Use and Care

Recharge with specified charger. Use specific battery packs. Keep batteries away from metal. Avoid abusive conditions.

Service

Maintaining Tool

Keep tool, battery pack, and charger in good repair. Inspect regularly for issues.

Cleaning

Clean dust/debris from vents. Keep handles clean, dry, and free of oil/grease.

Repairs

Return tool, battery pack, and charger to nearest service center for repairs.

Accessories

Use only recommended accessories. Check for wear/damage before use.

Specific Safety Rules for Inflator

General Use

Use for intended inflation items only. Do not overinflate. Check item max pressure.

Operation Precautions

Do not leave tool unattended. Never block air outlet. Never carry by hose. Check hose/connections.

Cooling and Caution

Allow tool to cool for 10 mins after 10 mins use. Use common sense. Contact professional if unsure.

Chemical Warning

Some dust contains chemicals causing cancer/birth defects. Use ventilation and safety equipment.

Assembly and Operation

Assembly

Properly charge battery. Remove battery before maintenance. Insert battery securely.

Battery Indicator

Indicator shows battery power. Flashes when power is very low.

Setting the Units

Press and hold buttons to select PSI, BAR, or kPa for pressure display.

Temperature Protection

Indicator shows tool overheating. Allow tool to cool for 10 minutes.

Overload Warning

Indicator warns of constricted airflow. Check connections for blockages.

Using the Inflator

Place tool flat, attach accessory, insert battery, set target pressure, press inflation button.

Troubleshooting

Reset pressure sensor by holding power button and pressing + button 3 times.

Maintenance and Warranty

Presta Valve

Use Presta valve with Presta stems. Loosen nut before inflating, tighten after.

Maintenance

Never disassemble tool/battery. Contact service facility for repairs. Keep contacts clean.

Service - United States

Contact information for service and technical support in the USA.

Service - Canada

Contact information for service and technical support in Canada.

Limited Warranty

Details on warranty coverage, exclusions, and claims process for US and Canada.