To Next PageTo Next PageWhat to do if the red LED is on on my Milwaukee M12 FORCE LOGIC 2473-20 Power Tool?
If the red LED is illuminated, it indicates a device fault. Try the operation again. If the red LED remains lit, it is recommended to return the Milwaukee power tool, charger, and battery pack to a Milwaukee service facility for repairs.
Why is the green LED flashing on my Milwaukee M12 FORCE LOGIC 2473-20?
A flashing green LED indicates that the battery does not have sufficient charge to complete the operation. Charge the battery to resolve this issue.
What does it mean if the red LED is flashing on my Milwaukee Power Tool?
A flashing red LED indicates that the Milwaukee power tool is not within the correct operating temperature range. Ensure the device is used within a temperature range of -10°C to 50°C.
General| Voltage | 12V |
|---|---|
| Battery Compatibility | M12 |
| Tool Warranty | 5 years |
| Battery System | M12 |
| Battery Type | Li-ion |
| LED Light | Yes |
| Tool Type | Hydraulic Crimper |
| Length | 14.5 in |
| Optimal System | M12 |
| Tool Length | 14.5 in |
| Tool Weight | 5.6 lbs |
| Crimp Dies Included | Yes |
Keep work area clean and well lit; avoid explosive atmospheres; keep bystanders away.
Ensure proper plug matching, avoid wet conditions, protect cords, use GFCI in damp locations.
Stay alert, use PPE, prevent unintentional starting, dress properly, keep tools maintained.
Recharge with specified charger, use correct battery packs, keep away from metal objects.
Visual representation of electrical and measurement units used in the manual.
Technical details of the M12™ Press Tool, including voltage, force, and range.
Identifies key components and their labels within the tool's operation.
Instructions for safely removing and inserting the battery pack into the tool.
Steps for attaching, positioning, and securing the crimping head to the tool.
How to check the remaining battery charge using the fuel gauge indicator lights.
Step-by-step guide for performing a press operation, including safety checks and tool activation.
Explains LED status (green, red) for diagnosing tool issues and their corresponding solutions.
Advice on regular inspection, cleaning contacts, and when to seek professional servicing.
Guidelines for cleaning the tool's exterior and vents safely, avoiding damaging solvents.
Information on recommended accessories and contacting service centers for support.
Details the warranty terms, conditions, and exclusions for the power tool.
