To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee M12 0852-20 and is the answer not in the manual?
Keep work area clean and well lit. Avoid explosive materials and dust.
Avoid hazardous materials, do not leave unattended, disconnect battery before servicing.
Do not handle with wet hands.
Stay alert, wear eye protection, dust mask, avoid accidental starting, keep balanced.
Recharge with specified charger, use only designated packs, keep terminals from shorting.
Wear ear protection, dust mask, use common sense, maintain labels, avoid hazardous dust.
Instructions for removing and inserting the battery pack securely.
How to install nozzles and extension by lining up lugs and twisting.
How to start, stop, and adjust airflow using the trigger and lock-on switch.
Instructions for engaging the lock-on switch for continuous blower operation.
How to check battery charge level and understand low battery indicators.
How to switch between high and low air flow speeds using the trigger.
Regular inspection for issues and periodic service recommendations.
How to clean the tool using mild soap and water, avoiding solvents.
Instructions to return the tool, battery pack, and charger to an authorized service center.
Use only recommended accessories as others may be hazardous.
Contact information for US and Canadian service centers and warranty details.
Keep work area clean and well lit. Avoid explosive materials and dust.
Avoid hazardous materials, do not leave unattended, disconnect battery before servicing.
Do not handle with wet hands.
Stay alert, wear eye protection, dust mask, avoid accidental starting, keep balanced.
Recharge with specified charger, use only designated packs, keep terminals from shorting.
Wear ear protection, dust mask, use common sense, maintain labels, avoid hazardous dust.
Instructions for removing and inserting the battery pack securely.
How to install nozzles and extension by lining up lugs and twisting.
How to start, stop, and adjust airflow using the trigger and lock-on switch.
Instructions for engaging the lock-on switch for continuous blower operation.
How to check battery charge level and understand low battery indicators.
How to switch between high and low air flow speeds using the trigger.
Regular inspection for issues and periodic service recommendations.
How to clean the tool using mild soap and water, avoiding solvents.
Instructions to return the tool, battery pack, and charger to an authorized service center.
Use only recommended accessories as others may be hazardous.
Contact information for US and Canadian service centers and warranty details.
General| Voltage | 12V |
|---|---|
| Air Flow | 100 CFM |
| Battery Platform | M12 |
| Air Volume | 100 CFM |
| Battery Type | Lithium-Ion |
| Dimensions | 8.5 x 3.5 x 8.5 inches |
