To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee M12 2445-20 and is the answer not in the manual?
Keep work area clean, well-lit, and free from flammable materials. Keep bystanders away.
Use proper plugs, avoid wet conditions, protect cords, and use GFCI in damp locations.
Stay alert, wear PPE, prevent unintended start-up, dress properly, and avoid distractions.
Use correct tool, maintain sharpness, keep dry, and disconnect power before adjustments.
Recharge with correct charger and use only designated battery packs.
Use qualified personnel for repairs; never service damaged battery packs.
Hold tool properly, secure workpiece, keep hands clear of moving parts.
Remove/insert battery pack by releasing buttons and sliding until latched.
Install T-shank blades using the Quik-Lok tension lever.
Use to stabilize workpiece and reduce splintering; do not use for bevel cuts.
Attach cover to protect workpiece surface; remove when not needed.
Start/stop by pulling/releasing trigger; adjust speed with trigger pressure.
Check battery charge level by pulling the trigger.
Lock trigger to prevent accidental operation during maintenance or storage.
Guide tool along cut line, use light pressure, employ guides for straight cuts.
Check for hidden hazards before plunge cutting; use starter hole for hard materials.
Keep tool, battery, and charger in good repair. Inspect for issues and contact service.
Clean dust from vents and keep handles dry using mild soap and damp cloth.
Contact information for service, technical support, and warranty inquiries in the USA.
Contact information for service, technical support, and warranty inquiries in Canada.
Details on warranty coverage, exclusions, and procedures for repair or replacement.
Information on warranty validity and service for products sold in these regions.
Keep work area clean, well-lit, and free from flammable materials. Keep bystanders away.
Use proper plugs, avoid wet conditions, protect cords, and use GFCI in damp locations.
Stay alert, wear PPE, prevent unintended start-up, dress properly, and avoid distractions.
Use correct tool, maintain sharpness, keep dry, and disconnect power before adjustments.
Recharge with correct charger and use only designated battery packs.
Use qualified personnel for repairs; never service damaged battery packs.
Hold tool properly, secure workpiece, keep hands clear of moving parts.
Remove/insert battery pack by releasing buttons and sliding until latched.
Install T-shank blades using the Quik-Lok tension lever.
Use to stabilize workpiece and reduce splintering; do not use for bevel cuts.
Attach cover to protect workpiece surface; remove when not needed.
Start/stop by pulling/releasing trigger; adjust speed with trigger pressure.
Check battery charge level by pulling the trigger.
Lock trigger to prevent accidental operation during maintenance or storage.
Guide tool along cut line, use light pressure, employ guides for straight cuts.
Check for hidden hazards before plunge cutting; use starter hole for hard materials.
Keep tool, battery, and charger in good repair. Inspect for issues and contact service.
Clean dust from vents and keep handles dry using mild soap and damp cloth.
Contact information for service, technical support, and warranty inquiries in the USA.
Contact information for service, technical support, and warranty inquiries in Canada.
Details on warranty coverage, exclusions, and procedures for repair or replacement.
Information on warranty validity and service for products sold in these regions.
General| Brand | Milwaukee |
|---|---|
| Model | M12 2445-20 |
| Category | Cordless Saw |
| Language | English |
