EasyManua.ls Logo

Milwaukee M12 FUEL 2416-20 - User Manual

Milwaukee M12 FUEL 2416-20
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
Cat. No. / No de cat.
2416-20
SDS
PLUS
M12 FUEL™ 5/8" SDS PLUS ROTARY HAMMER
PERCEUSE À PERCUSSION SDS PLUS SANS FIL DE 16 mm
(5/8") M12 FUEL™
ROTOMARTILLO SDS PLUS M12 FUEL™ INALÁMBRICO DE
16 mm (5/8")
Question and Answer IconNeed help?

Do you have a question about the Milwaukee M12 FUEL 2416-20 and is the answer not in the manual?

Summary

General Power Tool Safety Warnings

General Safety Instructions

Read all instructions for safe operation. Save for future reference.

Work Area Safety

Maintain a clean, well-lit work area free from flammable materials.

Electrical Safety

Ensure proper electrical connections and avoid wet conditions.

Personal Safety

Stay alert, use personal protective equipment, and prevent unintentional starting.

Power Tool Use and Care

Properly use, maintain, and store power tools to prevent accidents.

Battery Tool Use and Care

Handle batteries properly, use correct chargers, and avoid extreme temperatures.

Battery Handling and Safety

Battery Safety Precautions

Avoid shorting, liquid contact, damage, and exposure to fire or heat.

Service and Repairs

Tool Servicing and Maintenance

Ensure servicing by qualified personnel and regular maintenance.

Specific Safety Rules for Rotary Hammer

Rotary Hammer Specific Safety

Use ear protection, auxiliary handle, and maintain awareness.

Assembly and Installation

Battery Removal and Installation

Instructions for safely removing and inserting the battery pack.

Bit Installation

Properly install SDS or SDS Plus shanks, ensuring they are clean and locked.

Operational Features

Fuel Gauge Indicator

Check battery charge level via indicator lights.

Mode Selection

Select drilling or rotary hammering mode using the selector.

Control Switch Operation

Operate the forward, reverse, and lock functions of the control switch.

Starting, Stopping, and Operating

Tool Starting and Speed Control

How to start, stop, and adjust speed using the trigger.

Operating Procedures

Proper grip, pressure, and techniques for effective operation.

Applications and Bit Selection

Drilling Safety and Applications

Safety warnings for drilling and procedures for cutting rebar.

Selecting Appropriate Bits

Choose the correct type and ensure bits are sharp for best performance.

Drilling Technique

Steps for clamping, starting, drilling, and clearing chips.

Drilling Specific Materials

Advice for drilling wood, plastics, and composition materials.

Maintenance and Cleaning

Tool Maintenance and Repair

Guidelines for maintaining tool condition and seeking repairs.

Cleaning Procedures

How to clean the tool using mild soap and water.

Accessories and Service Information

Recommended Accessories

Information on using recommended accessories and where to find them.

Service Contact Information

Contact details for service and support in the US and Canada.

Limited Warranty

Warranty Coverage and Exclusions

Details on warranty period, what is covered, and what is excluded.

Règles de Sécurité Générales Relatives Aux Outils Électriques

Sécurité du Lieu de Travail

Maintenir une aire de travail propre et bien éclairée, loin des atmosphères explosives.

Sécurité Électrique

Éviter le contact avec des surfaces mises à la terre et l'exposition à l'eau ou l'humidité.

Sécurité Individuelle

Rester attentif, porter des équipements de protection et faire preuve de bon sens.

Milwaukee M12 FUEL 2416-20 Specifications

General IconGeneral
BrandMilwaukee
ModelM12 FUEL 2416-20
CategoryRotary Hammer
LanguageEnglish

Related product manuals