What to do if Milwaukee M18 2771-20 Water Pump has shutdown?
If your Milwaukee Water Pump shuts down, there are several potential causes. It could be due to a dry pump shutdown, a locked impeller, or the battery being installed when the pump was turned on. To resolve this, correct the situation, then turn the tool off and back on to reset it.
Why is my Milwaukee Water Pump flow rate too low?
A low flow rate in your Milwaukee Water Pump can stem from several issues. The inlet or outlet line might be clogged or damaged, requiring you to replace it. Alternatively, the inlet connection may not be airtight; try tightening it and adding Teflon tape or a gasket if needed. Also, check that the impeller cover is secured tightly by hand-tightening the four cover screws. Finally, the impeller might be worn out.
What to do if Milwaukee Water Pump has over temperature shutdown?
If your Milwaukee Water Pump experiences an over-temperature shutdown, it could be due to a blocked outlet line or the pump being ON for too long. In such cases, allow the pump to cool down. Additionally, the outlet line may be too high or too long, so correct the situation, then turn the tool off and back on to reset it.
Guidelines for proper usage and maintenance of the pump.
Essential safety precautions for operating the pump safely.
Instructions for safe and effective use of battery packs with the tool.
Safety measures to ensure a secure and hazard-free work environment.
Procedure for safely installing and removing the battery pack.
Guidance on connecting and using inlet and outlet hoses for optimal performance.
Procedure for clearing or replacing the pump impeller.
Instructions for safely storing the pump and its components.
How to clean the pump using mild soap and a damp cloth.
Information on returning the tool for professional repair services.
List of recommended accessories for the pump.
Contact information for service and support in the US.
Warranty terms applicable to products sold in the United States and Canada.
General| Voltage | 18V |
|---|---|
| Battery System | M18 |
| Max Head | 16 ft (4.9 m) |
| Weight | 6.6 lbs (3 kg) |
| Pump Type | Submersible |
| Flow Rate | 480 GPH |
| Battery Compatibility | M18 |
| Inlet Connection | 3/4 in NPT |
| Outlet Connection | 3/4 in NPT |
| Hose Connection Size | 3/4 in |
To Next Page
