16 17
START
STOP
Push the switch forward and hold until
tool starts (approx. 0,6 seconds).
If the switch is held on for more than 3
seconds, the tool will shut off .
Startup protection: When switched on,
the machine will not start up after the
battery is inserted again.
0,6 sec
800 min
-1
1350 min
-1
1850 min
-1
2500 min
-1
3150 min
-1
3500 min
-1
1500 min
-1
21 3 4 5 6 A
A - Auto-Controlled Start: Fully press the switch. Saw runs at reduced speeds until blade engages workpiece. The saw speed will
increase automatically to provide the most effi cient cut.
Insulated gripping surface
To Next Page
Loading...
