Need help?Do you have a question about the Milwaukee MXFC Series and is the answer not in the manual?
Instructions to remove the transport lock from the battery pack before initial use.
Visual indicators showing the remaining charge percentage of the battery pack.
Explains the meaning of different LED light signals on the charger during operation.
Illustrates the step-by-step sequence of charging a battery pack with the charger.
Provides voltage, current, weight, and ambient temperature details for the MXFC charger.
Details expected charging times for compatible battery packs based on capacity.
Crucial safety precautions for charger and battery use, including disposal and short circuit risks.
Specifies intended use, mains connection, and compatible battery types for the charger.
Describes Li-ion battery behavior, charging, temperature limits, and state of charge reading.
Covers regulations and safety measures for transporting lithium-ion batteries.
Provides maintenance advice, symbol explanations, and repair information.
Instructions to remove the transport lock from the battery pack before initial use.
Visual indicators showing the remaining charge percentage of the battery pack.
Explains the meaning of different LED light signals on the charger during operation.
Illustrates the step-by-step sequence of charging a battery pack with the charger.
Provides voltage, current, weight, and ambient temperature details for the MXFC charger.
Details expected charging times for compatible battery packs based on capacity.
Crucial safety precautions for charger and battery use, including disposal and short circuit risks.
Specifies intended use, mains connection, and compatible battery types for the charger.
Describes Li-ion battery behavior, charging, temperature limits, and state of charge reading.
Covers regulations and safety measures for transporting lithium-ion batteries.
Provides maintenance advice, symbol explanations, and repair information.
This document describes the Milwaukee MXFC charger, designed for MXFCP203 and MXFXC406 Milwaukee Li-Ion battery packs. The charger is intended for indoor use and is part of the Milwaukee MX FUEL system, emphasizing "Nothing but HEAVY DUTY®."
The MXFC charger is used to recharge Milwaukee MXFCP203 and MXFXC406 Li-Ion battery packs. It automatically begins charging when a battery is inserted, indicated by a continuous red light. If a hot or cold battery pack is inserted, the charger will display a flashing red light and will only begin charging once the battery reaches the correct temperature range (0°C to 40°C). The charger is designed to keep the battery pack fully charged if left plugged in, with the light indicator remaining the same as during normal charging. If the light indicator flashes red and green, it suggests a problem with the battery pack seating or the charger itself, requiring removal and reinsertion of the battery, or unplugging the charger for a few minutes.
The battery packs themselves are partially charged upon delivery and will switch to a non-operative state if not used for long periods. They automatically switch off when fully discharged to prevent depth discharge. In extreme circumstances, if the internal temperature of the battery becomes too high, the battery will shut down and needs to be placed on the charger to reset. The state of charge of a battery can be checked by pressing a button on the battery pack, with the number of illuminated LEDs indicating the charge level. A flashing LED indicates a maximum power reserve of 10%.
General| Brand | Milwaukee |
|---|---|
| Model | MXFC Series |
| Category | Battery Charger |
| Language | English |
To Next Page