Floor Stand Assembly Instructions continued
10
WARNING!
The mimio Board is a highly durable porcelain steel
whiteboard. As a result of its construction, it is a very heavy
product, weighing in excess of 70 lbs. For safety reasons,
assembly of the mimio Board product and its floor stand
requires the assistance of at least 2 adults.
Please be sure to follow the assembly instructions. Upon
completion, please check and verify that all bolts are
appropriately positioned and tightened.
1
Lie the 2 vertical support legs flat onto the floor with the
bottom crossbeam positioned between the 2 support
legs in preparation for assembly. Use the hex key to
secure the bottom crossbeam to the 2 vertical support
legs using 2 of the bolts and 2 of the washers.
To Next Page
Loading...