To Next Page
J
jamesturnerAug 4, 2025
Why does my Mimio MimioProjector say 'Projector Overheated'?
- EEmily RaymondAug 4, 2025
If the Mimio Projector's OSD shows 'Projector Overheated', it means there is a thermal sensor error (System Over Temperature).
Why does my Mimio MimioProjector say 'Projector Overheated'?
If the Mimio Projector's OSD shows 'Projector Overheated', it means there is a thermal sensor error (System Over Temperature).
Provides instructions and diagrams for physically connecting the projector to power sources.
Explains the procedure for powering on the projector and selecting an input source.
Provides a step-by-step guide for safely replacing the projector lamp module.
Outlines the process for cleaning the projector's dust filters to maintain performance.
Offers solutions for common problems encountered with the projector's overall operation.
General| Resolution | XGA (1024 x 768) |
|---|---|
| Contrast Ratio | 2000:1 |
| Connectivity | Composite Video |
| Projection Size | 30 - 300 inches |
| Inputs | VGA, Composite Video, USB |
| Outputs | VGA |