Mimosa Backhaul B24 - Page 59

Mimosa Backhaul and B24 Help Content
Mimosa Backhaul Management
Copyright © 2018 Mimosa Page Page 56
B24󰾬
Fiber (SFP) Port - When Fiber (SFP) is ON, SFP is used for data and management. Fiber (SFP) Fail Safe option is
●
only available when Fiber (SFP) is ON. When Fiber (SFP) is OFF, by default, Ethernet (RJ45) is used for both data
and management traffic.
Fiber (SFP) Fail Safe - When Fiber (SFP) link goes down, data and management traffic will fail-over to Ethernet
●
(RJ45) and traffic will pass through Ethernet (RJ45) if available. If Fiber (SFP) Fail Safe is OFF, and if Fiber (SFP)
goes down, all traffic will be blocked.
Ethernet (RJ45) Speed - This drop-down allows the user to select one of the following options: Auto, 10, 100,
●
1000BaseT (at full or half duplex). Auto setting is recommended.