Mimosa Backhaul and B24 Help Content
Mimosa Backhaul LED Status Indicators
Copyright © 2018 Mimosa Page Page 77
Solid Yellow 100BASE-T
Blinking Yellow 100BASE-T with Traffic
Solid Red 10BASE-T
Blinking Red 10BASE-T with Traffic
Wireless Status LED Table
The Wireless Status LED indicates a link between local and remote devices. The blink rate represents received signal
strength, which is useful while aiming the local device.
State LED Description
Off Not Associated (No Link)
Blinking Blue Associated; Blink rate proportional to signal strength*
* Ranges from 1 Hz (one blink per second at -90 dBm or less) to 10 Hz (one blink per 100 ms at -50 dBm or greater).