EasyManua.ls Logo

mind alive David Delight - Sound Sync Sessions; Tones and Heartbeat

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[9]
Sound Sync sessions use
randomization. The left and
right frequencies will vary
slightly from the target rate
to create a lucid mind-state.
SOUND SYNC SESSIONS
The Delight has the ability to use sound to run a special session for relaxation
and lucid dreaming effects. To start a Sound Sync session, connect your audio
device (e.g. CD or MP3 player) to the Audio In jack ( ) with the 3.5mm stereo
patch cord provided.
Turn on the Delight, but do not select a session. Start the playback on the audio
device. After a short period (about 10 seconds) the Delight will detect the audio
and enter Sound Sync mode. The Graph will activate to indicate there is audio
present and the session LEDs will flicker. Press a Session button to begin the
session.
A Sound Sync session will last for as long
as audio is playing. Once the audio ends,
the session will Soft Off™. If audio is
detected again during the Soft Off™, the
lights will fade back up and the session
will continue.
Session
Target Frequencies
20 Hz
7.8Hz
Left Stim 14Hz, Right Stim 20Hz
6.5Hz
Left Stim 10Hz, Right Stim 19.5Hz
TONES AND HEARTBEAT
Tones and heartbeat may be turned on during any Sound Sync session. To turn
on tones, press and release the Tone button ( ). The tones will cycle through
the available tone options (see page 3). To turn on the heartbeat, press and hold
the Tone button ( ). Press and hold the Tone button ( ) again to turn the
heartbeat off.

Other manuals for mind alive David Delight

Related product manuals