EasyManua.ls Logo

Mind Tools ILightz - Page 10

Default Icon
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
After set up is complete press the center key on the iLightz keypad ...
You are now ready to begin your journey into mind exploration, gently and with absolutely no
conscious effort. Enjoy!
The iLightz and iLightz Pro have 9 total keys. 4 are on the outer perimeter, the remaining are on
the 5 way keypad in the center (for complete description refer to “Keypad Function” section).
Following are general navigation guidelines for the keys:
Pressing any key will turn the unit “on” and display the welcome screen.
Press any key again and the main menu is displayed.
Generally, the outside keys will navigate up and down as will the up/down center keys.
I.E. the top two outside keys move up, the two bottom move down (our unit is ambidex-
trous).
Except when in manual mode at which time the outer keys act to change the value of the
selected parameter up/down.
When running a program the right outer keys control the “volume” of the iLightz sound.
The left outer keys control the “brightness/intensity” of the lightframes. This is so a user
can change these parameters without having to look at the keypad.
The round center key always acts as an “enter/select” key EXCEPT if pressed and held
for more than 2 seconds which always
turns unit off.
To turn on your iLightz press the center key
and the ‘Welcome’ screen appears. It times
out after 5 seconds, replaced by the ‘Main
Menu’ screen (or simply press the center key
once to go directly to the ‘Main Menu’).