104
7−11. Tare weight cancellation (A/Z)
The instrument prepares Tare weight cancellation (A/Z) function.
Pressing the
key makes Tare weight cancellation (A/Z) function operated and when the load
display becomes net weight display, at the same time, the “A/Z” lights up on the status display and
load display value becomes “0”.
Moreover, when the
key is pressed, Tare weight cancellation clear(A/Z OFF) function will
activate and at the same time when the load display value becomes gross weight, the “A/Z” on the
status display will turn off.
7−12. Zero set
The instrument prepares the zero set function.
When the display value on load display is within ±10 % against the maximum display value (Refer
to the chapter 5.), pressing the
key makes zero set function operated and the display will show
“0” compulsively.
However, zero set will not be accepted when zero compensation for total ±10 % is executed with
zero set and zero tracking until that time. (ER−0 display)
Also, the same operation can be made with the operation of “ZERO” at the external control input
signal. Cancellation for data applied zero compensation by zero set can be executed with Function
F−98.
● When tare weight cancellation (A/Z) is executed (during A/Z display
lights up), zero set will not be accepted. It will display “ER−5”.
When zero set is desired to execute, execute after making the Tare
weight cancellation clear (A/Z OFF).
7−13. Key lock function
The instrument prepares key lock function.
With the Function F−06, execute key lock OFF by setting each digit=0, and executes key lock ON
by setting each digit=1. As for default, all is key lock OFF. Besides, the correspondence between
the target of key lock and setting digits are as follows:
10
0
桁：ON/OFF of CHECK value(Pressing the key together with the key)
10
1
桁：A/Z ON()、A/Z OFF()
10
2
桁：Call changing mode of the S※ set()
10
3
桁：Execution of zero setting()
10
4
桁：Call the function mode()
Moreover, when the call the function mode(
key) is locked, the function mode is entered once
after pressing the
key together with the key for over one seconds.
To Next Page
Loading...
