2
2. Name and function of each point
2−1. Front panel
①
③
②
④
⑤
⑩
⑥
⑦
⑧
⑨
⑪
⑫
1
Load display section
The load data is shown in the Measurement mode, and status or set value is shown in various
kinds of Calibration mode and Setting mode.
2
Judgement display
Compared results by comparator function can be displayed.
3
Status display
RUN Lights up in the measurement mode.
A/Z Lights up in executing the tare weight cancellation (A/Z ON).
Lights off after clearing the tare weight cancellation (A/Z OFF).
LOCK Lights up when the input between the HOLD and COM. at the external control is
shorted. During light on, any key operation is prohibited.
HOLD Lights up when the input between the HOLD and COM. at the external control is
shorted.
CHECK Lights up when the CHECK is turned on by pressing the
key together with
the
key.
To Next Page
Loading...
