3
4
key
Using for executing the tare weight cancellation(A/Z ON).
5
key
Using for clearing the tare weight cancellation(A/Z OFF).
6
key
Using for calling the change mode of the set value, or carry up the numeric in the various
setting.
7
key
Using for executing the zero set(one touched zero adjustment), or the numeric increment in
the various setting.
8
key
Using for shifting to the function mode.
Also, using for turning on/off of the check value by pressing the
key together with the
key.
9
key
Using for registering the set values at the time of various settings.
Also, using for turning on/off the check value by pressing
key together with the key.
10
Terminals
Connects with the external control input, the open collector output, the strain gage applied
transducers, such as load cell, the analog output, the AC power supply, and ground.
11
Optional products attaching portion
One option either of BCD−OUT, CC−LINK, RS−232C, or RS−422/485 is installed.
The cover is installed when there is no optional products.
12
Position where unit seal is pasted
Please put the unit seal of the attachment if necessary.
To Next Page
Loading...
