III
For safe operation
Be sure to read this instruction manual before use.
1. Installation place
● Use the instrument where the temperature/humidity specifies with
the range as follows：
Environmental temperature ：−10 ℃ to 50 ℃
Environmental humidity ：Less than 85 %R.H. (Non condensing)
(1) Location where installation is not allowed.
Warning ● Don’t locate the instrument on the places as follows :
It may cause an unexpected faulty in the instrument.
D Do not locate the instrument in direct and/or high temperature area.
D Do not use the instrument in a high humid area.
D Do not install the instrument where there are vibrations and shocks.
D Do not use the instrument where there is excess of dusts and fine particles.
D Do not use the instrument where there are corrosive gas and salt and like
that.
D Do not install the instrument where there is rapid change of temperature
and humidity.
D Do not install the instrument near the devices that are magnetized or
generate an electromagnetic field.
D Do not install the instrument where the instrument may be affected by
radioactivity or radial rays.
D Avoid the location where chemical reaction may take place such as in a
laboratory, or like that.
To Next Page
Loading...
