Mini?Cam SoloPro 360 - Manual Conventions

Rev A - 04/2012
Page: 6
WARNING
Warning denotes a hazard. It calls attention to a procedure which, if not correctly performed or
adhered to, could result in injury or loss of life. Do not proceed beyond a warning note until the
indicated conditions are fully understood and met.
CAUTION
Caution denotes a hazard. It calls attention to a procedure that, if not correctly performed or
adhered to, would result in damage to or destruction of the instrument. Do not proceed beyond a
caution sign until the indicated conditions are fully understood and met.
General Safety Considerations
WARNING!
No operator serviceable parts inside. Refer servicing to qualified personnel at Mini-Cam Ltd or one
our authorised dealers. To prevent damage, do not remove any covers.
If this instrument is not used as specified, the protection provided by the equipment may be
impaired. This instrument must be used in a normal condition (in which all means for protection are
intact) only.
CE
The CE mark is a registered trademark of the European Community (If accompanied by a year, it is
when the design was proven).
Manual Conventions
Keyboard Key
This represents a ke
y
ph
y
sicall
y
located on the instrument ke
y
board of
the instrument.
‘Softkey’
This indicates a “softke
y
," a ke
y
whose label is determined b
y
the
firmware of the instrument.
Screen Text
This indicates text displa
y
ed on the instruments screen.