At a glance
Button in the vehicle
Parking assistant
Ultrasound sensors
The ultrasound sensors for measuring parking
spaces are located on the wheel arches.
To ensure full operability:
▷ Keep the sensors clean and free of ice.
▷ When using high-pressure washers, do not
spray the sensors for long periods and
maintain a distance of at least 12 in/30 cm.
▷ Do not paste over sensors.
Switching on/off
Switching on with the button
Press the button.
The LED lights up.
The current status of the parking space search
is indicated on the Control Display.
Parking assistant is activated automatically.
Switching on with reverse gear
Shift into reverse.
The current status of the parking space search
is indicated on the Control Display.
To activate: "Parking Assistant"
Switching off
The system can be deactivated as follows:
▷ Press the button.
▷ Switch off the ignition.
Indicator on the Control Display
System activated/deactivated
Symbol Meaning
Gray: the system is not available.
White: the system is available but not
activated.
The system is activated.
System status
▷ Colored symbols, see arrows, on the side of
the vehicle representation. Parking assis‐
tant is activated and search for parking
space active.
▷ Suitable parking spaces are displayed next
to the vehicle symbol at the edge of the
road as on the Control Display. When the
Seite 124
CONTROLS
Driving comfort
124
Online Edition for Part no. 01 40 2 927 905 - II/14
To Next Page
Loading...
Need help?
General
