EasyManuals Logo

Mini 2014 MINI User Manual

Mini 2014 MINI
230 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #195 background imageLoading...
Page #195 background image
Loosen 3 screws, arrow.
2. Push the heat shield forward and the
bumper back in order to be able to reach
the fog lamp.
3. Turn the bulb socket counterclockwise and
remove.
The wire is long enough to guide the socket
down and through between any heat shield
that may be installed and the bumper.
4. Replace defective bulb.
5. To install the new bulb, proceed in reverse
order of removal.
Right fog lamp:
1.
Turn the bulb socket counterclockwise and
remove.
The wire is long enough to guide the socket
down and through between any heat shield
that may be installed and the bumper.
2. Replace defective bulb.
3. To install the new bulb, proceed in reverse
order of removal.
Side turn signal, bulb replacement
Follow the general instructions on Lamps and
bulbs, refer to page 189.
Bulbs:
With orange lens: W5W
Seite 195
Replacing components
MOBILITY
195
Online Edition for Part no. 01 40 2 927 905 - II/14

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mini 2014 MINI and is the answer not in the manual?

Mini 2014 MINI Specifications

General IconGeneral
BrandMini
Model2014 MINI
CategoryAutomobile
LanguageEnglish

Related product manuals