The triple turn signal duration can be ad-
justed.
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Lighting"
4. "Exterior lighting"
5. "One-touch turn signal"
6. Select the desired setting.
Settings are stored for the profile currently
used.
Brief blinking
Press the lever to the resistance point and
hold it there for as long as you want the
turn signal to flash.
Malfunction
Unusually rapid blinking of the indicator
light indicates that a turn signal bulb has
failed.
High beams, headlight flasher
Press the lever forward or pull it backward.
– High beams on, arrow 1.
The high beams light up when the low
beams are switched on.
– High beams off/headlight flasher, ar-
row 2.
Window wiper system
Safety information
Warning
If the wipers start moving in the folded
away state, body parts can be jammed or
damage may occur to parts of the vehicle.
There is a risk of injury or risk of damage
to property. Make sure that the vehicle is
switched off when the wipers are in the
folded away state and the wipers are
folded in when switching on.
NOTICE
The wiper blades can wear out or become
damaged prematurely when wiping on a
dry window for a longer period of time.
The wiper motor can overheat. There is a
risk of damage to property, among other
potential damage. Do not use the wipers
when the window is dry.
NOTICE
If the wipers are frozen to the windshield,
the wiper blades can be torn off and the
wiper motor can overheat when switching
on. There is a risk of damage to property,
among other potential damage. Defrost the
windshield prior to switching the wipers
on.
Seite 109
Driving CONTROLS
109
Online Edition for Part no. 01405A53AA0 - II/22
To Next Page
Loading...
