Technical data
Vehicle features and options
This chapter describes all standard, country-
specific and optional features offered with
the series. It also describes features and
functions that are not necessarily available
in your vehicle, e.g., due to the selected op-
tions or country versions. This also applies
to safety-related functions and systems.
When using these functions and systems,
the applicable laws and regulations must be
observed.
General information
The technical data and specifications in the
Owner's Manual are used as guidance val-
ues. Vehicle-specific data may deviate from
this, for instance due to the optional equip-
ment chosen, national-market version, or
country-specific measuring process. De-
tailed values can be found in the approval
documents, on signs on the vehicle or can
be obtained from a dealer’s service center
or another qualified service center or repair
shop.
Dimensions
The dimensions can vary depending on the
model version, equipment version or coun-
try-specific measurement procedure.
The height of the vehicle can also differ,
e.g., due to tires and vehicle load.
MINI Convertible
Width with mirrors in/mm 75.9/1,928
Width without mirrors in/mm 68/1,727
Height in/mm 55.7/1,415
Length in/mm 152.8/3,880
Wheelbase in/mm 98.2/2,495
Smallest turning radius diam. ft/m 35.4/10.8
Seite 302
REFERENCE Technical data
302
Online Edition for Part no. 01405A53AA0 - II/22
To Next Page
Loading...
