Resetting average values
Press and hold the button on the turn signal
lever.
Engine temperature display
Principle
The current engine temperature, based on a
combination of coolant and engine oil tem-
perature is displayed. As soon as the opti-
mum operating temperature has been at-
tained, the indicator is in the center
position.
General information
If the engine oil or coolant, and thus the en-
gine, become too hot, a Check Control mes-
sage is displayed too.
When the engine temperature is too
high, a red indicator light is dis-
played.
When the engine oil temperature is
too high, a red indicator light is dis-
played.
To check the coolant level, refer to
page 278.
Instrument cluster without enhanced
features: display
Instrument cluster with enhanced
features: display
Always Open Timer
The Always Open Timer displays the cur-
rent travel time and total travel time with
the convertible top open in minutes and
hours.
Reset the Always Open Timer
Reset the current travel time: press button
on the turn signal lever for approx. 2 sec-
onds with the travel times displayed.
Seite 140
CONTROLS Displays
140
Online Edition for Part no. 01405A53AA0 - II/22
To Next Page
Loading...
