Mini CONVERTIBLE - Page 143

Accept current speed as the speed
warning
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Speed warning"
4. "Select current speed"
LED ring on the central in-
strument cluster
Principle
The LED ring displays light animations to
represent specific functions.
Basic displays
Basic functions, for instance the tachome-
ter, can be set to be displayed continually if
so desired.
Event displays
Functions that are only displayed tempora-
rily, for instance the volume or temperature
settings, can be set as event displays.
Several vehicle assistance functions can
also be displayed on the LED ring. This dis-
play corresponds with the displays of the
function in the respective display.
Example: tachometer
Like the tachometer in the instrument clus-
ter, the light animations of the tachometer's
basic display show the current RPMs and
the respective RPM warning thresholds.
Display
– Arrow 1: current RPM.
– Arrow 2: Advance warning zone.
– Arrow 3: warning field.
Switching on/off LED ring
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Displays"
4. "Center Instrument"
5. "Center Instrument"
Adjusting the LED ring
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Displays"
4. "Center Instrument"
5. "Basic display" or "Event display"
6. Select the desired setting.
Setting the brightness
The brightness can be adjusted when night
lighting is active in the instrument cluster.
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
Seite 143
Displays CONTROLS
143
Online Edition for Part no. 01405A53AA0 - II/22