– All Intelligent Safety systems are
switched off.
– The LED goes out.
Warning with light braking
function
Display
If a collision with a detected person is im-
minent, a warning symbol appears on the
instrument cluster and in the Head-up Dis-
play.
The red icon is displayed and a sig-
nal sounds.
Intervene immediately by braking or
make an evasive maneuver.
Brake intervention
The warning prompts the driver to inter-
vene. When a warning occurs, the maxi-
mum braking force is used when the brake
is applied. In order to activate the Brake As-
sistant function, you must apply the brakes
quickly and forcefully. If there is a risk of
collision, the system may assist with a mi-
nor brake intervention. When the vehicle is
traveling at a low speed, the vehicle may
come to a complete stop.
Manual transmission: during a brake inter-
vention up to a complete stop, the engine
may be shut down.
The brake intervention can be interrupted
by stepping on the accelerator pedal or by
actively moving the steering wheel.
The system’s ability to detect objects may
be limited in some circumstances. Refer to
the information in this Owner’s Manual re-
garding the limitations of the system and
actively intervene as warranted.
System limits
Safety information
Warning
The system is designed to operate in cer-
tain conditions and circumstances. Due to
conditions or other factors, the system
may not respond. There may be a risk of
accident or risk of damage to property. Ac-
tively intervene as warranted. Refer to the
information in this Owner’s Manual re-
garding the scope of the system’s opera-
tion and limitations.
Detection range
The detection capability of the camera is
limited.
Thus, a warning might not be issued or be
issued late.
The following situations may not be de-
tected, for example:
– Partially covered pedestrians.
– Pedestrians that are not detected as
such because of the viewing angle or
contour.
– Pedestrians outside of the detection
range.
– Pedestrians having a body size less than
32 in/80 cm.
Functional limitations
The system may be limited or may not be
available in the following situations:
– In heavy fog, wet conditions, or snow-
fall.
– In tight curves.
– If the camera field of view or the wind-
shield is dirty or covered.
– If the driving stability control systems
are deactivated, for instance DSC OFF.
Seite 173
Safety CONTROLS
173
Online Edition for Part no. 01405A53AA0 - II/22
To Next Page
Loading...
