Distance display
Distance 3
Distance 4
This value is set automatically af-
ter the system is switched on.
Instrument clusters without enhanced fea-
tures: selected distance from the vehicle
driving ahead is briefly displayed in the left
hand portion of the Info Display.
Detected vehicle
Instrument cluster without enhanced
features:
Icon lights up orange: a vehicle has
been detected ahead of you.
Instrument cluster with en-
hanced features:
Vehicle symbol is displayed: a
vehicle has been detected
ahead of you.
With the Stop&Go function for Step-
tronic transmissions:
Rolling bars: the detected vehicle
has driven away.
The system does not accelerate. To acceler-
ate, activate the system as follows:
– By briefly pressing the accelerator
pedal.
– By pressing the RES CNCL button.
– By pressing the or button.
Indicator/warning lights
Instrument cluster without enhanced
features:
Icon flashes orange.
Instrument cluster with enhanced
features:
Vehicle symbol flashes.
The conditions are not adequate for the sys-
tem to work.
The system was deactivated but applies the
brakes until you actively resume control by
pressing on the brake pedal or accelerator
pedal.
Icon flashes red and a signal sounds:
Brake and make an evasive maneu-
ver, if necessary.
System interrupted without detected
vehicle.
System interrupted with detected ve-
hicle.
Displays in the Head-up Display
The information from Active Cruise Control
can also be displayed in the Head-up Dis-
play.
System limits
Detection range
The detection capability of the system and
the automatic braking performance are lim-
ited.
For instance, two-wheeled vehicles may not
be detected.
Seite 189
Driving comfort CONTROLS
189
Online Edition for Part no. 01405A53AA0 - II/22
To Next Page
Loading...
