Jacking points
The jacking points for the vehicle jack are
located at the marked positions.
Jacking up the vehicle
Warning
Hands and fingers can be jammed when
using the jack. There is a risk of injury.
Comply with the described hand position
and do not change this position while us-
ing the jack.
1. Hold the vehicle jack with one hand, ar-
row 1, and grasp the jack crank handle
or lever with your other hand, arrow 2.
2. Insert the jack into the rectangular re-
cess of the jacking point closest to the
wheel to be changed.
3. Extend the jack by turning the jack
crank handle or lever clockwise.
4. Take your hand away from the jack as
soon as the jack is under load and con-
tinue turning the jack crank handle or
lever with one hand.
Seite 267
Wheels and tires MOBILITY
267
Online Edition for Part no. 01405A53AA0 - II/22
To Next Page
Loading...
