Time
The time is displayed in the in‐
strument cluster.
The time can be set via the on‐
board monitor.
Date
The date is displayed in the in‐
strument cluster.
The date can be set via the on‐
board monitor.
Range
Display
With a low remaining range:
▷ A Check Control message is
displayed briefly.
▷ The remaining range is
shown on the onboard com‐
puter.
▷ With a dynamic driving style, for instance
taking curves aggressively, the engine func‐
tion is not always ensured.
The Check Control message appears continu‐
ously below a range of approx. 30 miles/50 km.
NOTE
With a range of less than 30 miles/50 km
it is possible that the engine will no longer have
sufficient fuel. Engine functions are not ensured
anymore. There is a risk of property damage.
Refuel promptly.◀
Displaying the cruising range
Via the onboard monitor:
1.
"My MINI"
2. "System settings"
3. "Displays"
4. "Instrument panel"
5. "Range"
Current fuel consump‐
tion
Concept
Displays the current fuel consumption. Check
whether you are currently driving in an efficient
and environmentally-friendly manner.
Displaying the current fuel
consumption
Via the onboard monitor:
1.
"My MINI"
2. "System settings"
3. "Displays"
4. "Instrument panel"
5. "Current consumption"
Service requirements
Concept
The function displays the necessary service re‐
quirements and the corresponding mainte‐
nance procedures.
General information
After the ignition is turned on the instrument
cluster briefly displays available driving distance
or time to the next scheduled maintenance.
A service advisor can read out the current serv‐
ice requirements from your remote control.
Seite 100
CONTROLS
Displays
100
Online Edition for Part no. 01 40 2 976 545 - X/16
To Next Page
Loading...
Need help?
General
