activated. All settings stored in the driver profile
are automatically applied.
If several drivers use their own remote control,
the vehicle will adjust the personal settings dur‐
ing unlocking. These settings are also restored,
if the vehicle has been used in the meantime
by a person with a different remote control.
Changes to the settings are automatically saved
in the driver profile currently activated.
If another driver profile is selected via the on‐
board monitor, the settings saved in it will be
applied automatically. The new driver profile is
assigned to the remote control currently used.
There is an additional guest profile available
that is not assigned to any remote control: it
can be used to apply settings in the vehicle
without changing the personal driver profiles.
Functional requirements
For the system to be able to identify the driver
profile associated to a particular driver, the de‐
tected remote control must be clearly allocated
to the driver.
This is the case when:
▷ The driver is only carrying his or her own re‐
mote control.
▷ The driver unlocks the vehicle.
▷ The driver gets into the vehicle through the
driver's door.
Settings
The settings for the following systems and func‐
tions are saved in the active profile. The scope
of storable settings depends on country and
equipment.
▷ Unlocking and locking.
▷ Lights.
▷ Radio.
▷ Instrument cluster.
▷ Programmable memory buttons.
▷ Volumes, tone.
▷ Control Display.
▷ Climate control.
▷ Navigation.
▷ Park Distance Control PDC.
▷ Rearview camera.
▷ Head-up Display.
▷ MINI Driving Modes.
▷ Intelligent Safety.
Profile management
Selecting a driver profile
Regardless of the remote control in use, a dif‐
ferent driver profile may be activated. This al‐
lows you to call up personal vehicle settings if
you did not unlock the vehicle with your own
remote control.
Via the onboard monitor:
1.
"My MINI"
2. "Driver profiles"
3. Select driver profile.
4. "OK"
▷ All settings stored in the called-up driver
profile are automatically applied.
▷ The called-up driver profile is assigned to
the remote control being used at the time.
▷ If the driver profile is already assigned to a
different remote control, this driver profile
will apply to both remote controls.
Using a guest profile
The guest profile is for individual settings that
are stored in none of the three personal driver
profiles.
This can be useful for drivers who are using the
vehicle temporarily and do not have their own
driver profile.
Via the onboard monitor:
1.
"My MINI"
2. "Driver profiles"
Seite 53
Opening and closing
CONTROLS
53
Online Edition for Part no. 01 40 2 976 545 - X/16
To Next Page
Loading...
