4. Turn the bulb holder counterclockwise, ar‐
row 1, and remove, arrow 2.
5. Press the bulb gently into the bulb holder,
turn counterclockwise and remove.
6. Insert the new bulb and install the covers in
the reverse order. Make sure that the cov‐
ers engage.
Parking lights/fog lights/daytime
running lights
Follow the general instructions on lights and
bulbs, refer to page 225.
Bulbs:
▷ Parking lights: W5W
▷ Daytime running light: PSX24W.
▷ Fog light: H8.
Replacing the bulbs
1. Pull the cover forward out of the bumper.
2. Remove the screws and take out the front
light.
3. Remove the bulb holder.
▷ Parking lights: turn the bulb holder, ar‐
row 1, counterclockwise and remove.
▷ Daytime running lights: squeeze the
upper and lower locks of the bulb
holder, arrow 2, and remove the bulb
holder.
For better accessibility, remove the bulb
of the fog light as needed.
▷ Fog lights: turn the bulb holder, ar‐
row 3, counterclockwise and remove.
Seite 228
MOBILITY
Replacing components
228
Online Edition for Part no. 01 40 2 976 603 - X/16
To Next Page
Loading...
