4. Pull the bulb out of the fixture.
5. Insert the new bulb and install the cover in
the reverse order.
The daytime running lights bulb holder en‐
gages audibly, first below, then above.
LED front lights, bulb replacement
General information
The following lights feature LED technology:
▷ Daytime running lights
▷ High beams
▷ Low beams
▷ Cornering light
▷ Parking lights
▷ Fog lights
In the case of a malfunction, contact a dealer’s
service center or another qualified service cen‐
ter or repair shop.
Overview
Position of the headlights
1 Turn signal
2 Daytime running lights
3 Low beams/high beams
4 Cornering light
LED bug light
1 Parking lights
2 Fog lights
Turn signal
Follow the general instructions on lights and
bulbs, refer to page 225.
Bulbs: PWY24W.
1.
Open the hood, refer to page 215.
2. Turn the lid counterclockwise and remove.
3. Turn the bulb holder counterclockwise, ar‐
row 1, and remove, arrow 2.
Seite 229
Replacing components
MOBILITY
229
Online Edition for Part no. 01 40 2 976 603 - X/16
To Next Page
Loading...
