Technical data
Vehicle features and options
This chapter describes all standard, coun-
try-specific and optional equipment offered
with the series. It also describes features
and functions that are not necessarily avail-
able in the vehicle, e.g., due to the selected
options or country versions. This also ap-
plies to safety-related functions and sys-
tems. When using these functions and sys-
tems, the applicable laws and regulations
must be observed.
General information
The technical data and specifications in the
Owner's Manual are used as guidance val-
ues. Vehicle-specific data may deviate from
this, for instance due to the optional equip-
ment chosen, national-market version, or
country-specific measuring process. More
specific values can be obtained in appro-
val documents, on the vehicle info label,
or from an authorized service center or
another qualified service center or repair
shop.
Dimensions
The dimensions can vary depending on the
model version, equipment version or coun-
try-specific measurement procedure.
The height of the vehicle can also differ,
e.g., due to tires and vehicle load.
MINI 5-door model
Width with mirrors in/mm 75.9/1,928
Width without mirrors in/mm 68/1,727
Height in/mm 56.1/1,425
Length in/mm 159.1/4,040
Wheelbase in/mm 101.1/2,567
Smallest turning radius diam. ft/m 36.4/11.1
MINI 3-door model
Width with mirrors in/mm 75.9/1,928
Width without mirrors in/mm 68/1,727
Height in/mm 55.7/1,414
Seite 302
REFERENCE Technical data
302
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
