Mini COOPER User Manual

▷ Arrow 3: reversing light.
6. Proceed in the reverse order to insert the
new bulb and attach the bulb holder. Make
sure that the bulb holder engages in all fas‐
teners.
Central brake light and license plate
lights
Follow the general instructions on lights and
bulbs, refer to page 234.
The lights feature LED technology. In the case
of a malfunction, contact a dealer’s service cen‐
ter or another qualified service center or repair
shop.
Vehicles with a rear fog light
Follow the general instructions on lights and
bulbs, refer to page 234.
Bulbs: W16W
1.
On vehicles with heat shield:
Loosen 3 screws, arrow.
2. Push the heat shield forward and the
bumper back in order to be able to reach
the fog light.
3. Turn the bulb socket counterclockwise and
remove.
The wire is long enough to guide the socket
down and through between any heat shield
that may be installed and the bumper.
4. Replace nonworking bulb.
5. To install the new bulb, proceed in reverse
order of removal.
Vehicle with two rear fog lights
Follow the general instructions on lights and
bulbs, refer to page 234.
Bulbs: W16W
Left rear fog light:
1.
On vehicles with heat shield:
Loosen 3 screws, arrow.
2. Push the heat shield forward and the
bumper back in order to be able to reach
the fog light.
3. Turn the bulb socket counterclockwise and
remove.
Seite 240
MOBILITY
Replacing components
240
Online Edition for Part no. 01402983336 - X/17

Mini COOPER Specifications

General

Brand	Mini
Model	COOPER
Category	Automobile
Language	English