Safety notes
WARNING
Child restraint anchorages are designed to
withstand only those loads imposed by
correctly fitted child restraints. Under no
circumstances are they to be used for
adult seat belts, harnesses or for attaching
other items or equipment to the vehicle.
After using the child restraints, fold the
anchor fittings down again if necessary.
Mounting points
There are three mounting points for the up-
per retaining strap of ISOFIX child re-
straints.
The mounting point for the upper re-
taining strap is identified with a Top
Tether symbol.
Routing the retaining strap
1 Direction of travel
2 Head restraint
3 Hook for the upper retaining strap
4 Mounting point
5 Seat backrest
6 Upper retaining strap
Attaching the upper retaining strap
to the mounting point
1. Raise the head restraint if necessary.
2. Guide the upper retaining strap between
or along both sides of the head restraint
mounts to the mounting point.
3. Engage the hook of the retaining strap
in the mounting point on the rear seat.
4. Tighten the retaining strap by pulling it
firmly down.
Seite 100
CONTROLS Carrying children safely
100
Online Edition for Part no. 01402988211 - II/18
To Next Page
Loading...
