If this symbol is seen in the vehicle,
the vehicle has been approved in ac-
cordance with i-Size. The symbol
shows the mounts for the system's lower an-
chors.
The symbol shows the mounting
point for the upper retaining strap.
Suitable i-Size seats
Information on the suitability of the differ-
ent vehicle seats for the installation of child
restraint systems suitable for i-Size or
meeting i-Size requirements - in accordance
with standard ECE-R 129:
Group Front pas-
senger seat,
airbag ON
Front pas-
senger seat,
airbag OFF
Rear seats, outer
2nd seat row
Rear seat, middle
2nd seat row
i-Size X X i-U X
i-U, suitable for rearward and forward-facing i-Size child restraint systems.
X: not suitable for i-Size child restraint systems.
Not for Australia/New Zea-
land: Recommended child
seats
Appropriate child restraint systems for ev-
ery age and weight class are available from
a Service Partner of the manufacturer or an-
other qualified Service Partner or a special-
ist workshop.
The manufacturer of the vehicle recom-
mends the following child restraint systems:
– MINI Baby Seat Group 0+.
– MINI Junior Seat Group 1.
– MINI Junior Seat Group 2/3.
– ISOFIX base.
– Römer KidFix XP.
For Australia/New Zealand:
Child restraints
General
In accordance with ADR 34/02, provisions
have been made to allow installation of a
child restraint at each rear seating position.
The anchoring hooks which belong to the
upper retraining strap of the child restraint
- AS 1754, can be applied immediately to
the relevant mounting.
Please refer strictly to the installation in-
structions supplied with the child restraint
system.
Each seating position is fitted with a head
rest.
Seite 99
Carrying children safely CONTROLS
99
Online Edition for Part no. 01402988211 - II/18
To Next Page
Loading...
