Steptronic transmission
Principle
The Steptronic transmission combines the
functions of an automatic transmission with
the opportunity of changing gear manually
if required.
Safety note
WARNING
An unsecured vehicle can start moving
and rolling away. There is a danger of acci-
dents. Before leaving the vehicle, secure it
to prevent it from rolling away.
Observe the following to ensure that the
vehicle is secured against rolling away:
– Apply the parking brake.
– Turn the front wheels towards the
kerb on upward or downward gradi-
ents.
– Additionally secure the vehicle on up-
ward or downward gradients, for ex-
ample with a chock.
Selector lever version
General
Depending on the equipment, a transmis-
sion with either a latching selector lever or
a tap-operated selector lever is installed.
Transmission with a latching selector
lever
The selector lever positions P, R, N and D
are selected by moving the selector lever
into the respective selector lever position.
The selector lever engages in the selector
lever positions.
Transmission with a tap-operated
selector lever
The selector lever positions P, R, N and D
are selected by tapping the selector lever
forwards or back. The selector lever returns
to the middle position when released.
Selector lever position P is automatically
engaged, see page 117, in the following sit-
uations.
Selector lever positions
D drive position
Selector lever position for all normal driv-
ing. All gears for forward driving are selec-
ted automatically.
Seite 116
CONTROLS Driving
116
Online Edition for Part no. 01402988211 - II/18
To Next Page
Loading...
