EasyManua.ls Logo

Mini COUNTRYMAN 2018 - Page 117

Mini COUNTRYMAN 2018
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
R Reverse
Only engage selector lever position R when
the vehicle is stationary.
N neutral
In selector lever position N, the vehicle can
be pushed or can roll without power from
the engine, for example in car washes, see
page 119.
P Park
General
Selector lever position for parking the vehi-
cle, for example.
In selector lever position P, the transmis-
sion blocks the drive wheels.
Only engage selector lever position P when
the vehicle is stationary.
Before leaving the vehicle, ensure that the
selector lever is engaged in the P position.
The vehicle could otherwise start to move.
Automatic parking position for a
transmission with a tap-operated selector
lever
Selector lever position P is automatically
engaged in the following situations, for ex-
ample:
After stopping the engine in the radio
ready state, see page 103, or ignition
off, see page 102, when selector lever
position R, D or M/S is engaged.
If, while the vehicle is at a standstill and
selector lever position D, M/S or R is en-
gaged, the driver's seat belt is unfas-
tened, the driver's door is opened and
the brake pedal is not depressed.
After switching off the ignition, if selec-
tor lever position N is engaged.
Engaging selector lever positions:
with a latching selector lever
General
Apply the brakes until you are ready to
drive off, otherwise the vehicle will move
when a drive position is selected.
Operating requirements
The selector lever can only be taken out of
the selector lever position P when the igni-
tion is switched on or the engine is running.
Engaging selector lever position D, N,
R or P
Before shifting from selector lever posi-
tion P or N when the vehicle is stationary,
first depress the brake pedal, otherwise the
shift lock will not be deactivated and the de-
sired gearshift will not be performed.
A selector lever lock prevents the following
incorrect operation:
Inadvertent shifting to selector lever po-
sition P or R.
Inadvertent change from selector lever
position P to another selector lever posi-
tion.
1. To cancel the selector lever lock: with
the brake pedal pressed, press the but-
ton on the front of the selector lever.
Seite 117
Driving CONTROLS
117
Online Edition for Part no. 01402988211 - II/18
Draft
from BA-76

Related product manuals